Hydraulic fittings and pipe joints common difference

Hydraulic fittings and pipe joints common difference
The largest and most significant difference is that the hydraulic pressure is great staggering, hydraulic tubing impact of sudden burst of oil is large.
I say this certainly can not replace a dedicated with a common connector, because the hydraulic pressure can all be under great pressure, normal pressure up to 0.5 already dying, now we hydraulic tube fittings gap compared to foreign countries too, the hydraulic network of excellence hydraulic industry friends to remind you to interact more development of China's own hydraulic tube fittings.

Electro-hydraulic block brake - Introduction

Brake System Overview
Brake is braking. Is the moving parts of the mechanical stop or slow the mechanical parts. Commonly known as brakes, hydraulic manifold block brake. Frame from the main brake system, the brake member and the operating device and other components. Some of the brake is also equipped with an automatic brake clearance adjustment device member. hose cutting machine In order to reduce the size and structure of the braking torque, the brake is usually installed in the high-speed shaft of the device, but the higher security requirements of large-scale equipment (such as mine hoists, elevators, etc.) jic hydraulic fittings should be installed near the equipment and part of the low-speed shaft work on. Some brakes have been standardized and serialized by a professional factory for selection.