Swivel female swivel adapter for various sizes of adapter.

Female swivel adapter for various sizes of adapter.
Parallel thread metric adapters. It made of steel, in line with BS 5200, having a zinc yellow chromate surface to provide high corrosion resistance (500 hours salt spray test). All adapters have a working temperature range of -40 to + 120 ° C (for plug -3 to + 120°C). 60°inclusive cone makes these adapters an ideal port fitting for our various types of BSP reusable fittings and crimped hose assemblies together.

Introduction swivel nut adapter

Introduction swivel nut metric adapters
Straight BSP internal threads of male parallel threads adapter.：
Parkers K Series adapters manufactured in accordance with BS5200 standards and are designed for use with BSP seal hose rotary connector. Parkers K4 adapters can be used with Parker D9 / 92, B1, B2 and B4 adapter together. By adhesive seals, linear fitting adapter can also be used with ISO 1179-1 / DIN 3852 port.

American hydraulic adapter is widely used

American hydraulic adapter is widely used in engineering machinery, agricultural machinery, hydraulic system control, mainly by controlling the opening and closing valves to control the flow of hydraulic fluid to the hydraulic machines direction control mechanical movements. The main sub-manual control, electric control and pressure control and other types. Most of the domestic agricultural machinery is manual control and mechanical control distributor, imports the majority of large-scale agricultural and excavators electric control distributor. Automatic transmission shift lever car is hand dispenser control valve.

Triple-Lok 37 ° fitting

Triple-Lok 37 ° fitting has a reliable, leak-free connection, and is an excellent solution for high-pressure hydraulic area.
Triple-Lok 37 ° flared  suitable for use with metric pipe fittings . Their simplicity, compact design and easy assembly makes use fluid power in motion control applications a wide choice. metric hose fittings are particularly suitable for pressures up to 350 bar rated low and medium voltage applications, operating temperature range of -40 ° C to + 120 ° C. The design is simple. Flaring Tool vise and flaring pins (available separately) to form a seal and keep the liquid under pressure system. 37 ° tube end is flared, and when the tightening nut is clamped between the nozzle and casing parts. This provides an effective single seal point between the most fitting and the pipe flaring. Parker Triple-Lok fitting consists of three components: fitting body nut and sleeve. For steel parts, it is recommended DIN 2391 / C using seamless drawn tubes.

High pressure hose fittings leak prevention

In the hydraulic system, whether it is the stainless steel jic fittings or hose connectors are prone to leakage problems. For card sets of pipe joints, mostly due to the pipeline by large external force or impact, so that the card sleeve loose or deformed pipe ends and cause leakage, you should check whether the card holder out of round, edge or without defects, whether the pipe end in good condition and the extent of the compression ferrule nut, but also the elimination of external piping. For Japanse bsp threaded pipe fittings, mostly due to excessive flaring, undesirable quality or dismantle flaring resulting deformation or cracks caused by leaks, this time can be re-flared front end truncated. If the top male and female cones pressure seal, the leakage is mostly due to two cone damage, it is available for cone grinding abrasive sand. In some use "о" by the end face or outer ring seal occasion.