Cutting nozzle tip height is the end to reusable fitting

Cutting nozzle tip height is the end to reusable fitting be cut from the workpiece surface. The distance is generally 4 ~ 10mm. It is the same with the electrode within the shrinkage, the distance to the right in order to give full
waving plasma arc cutting efficiency, otherwise it would cutting efficiency and cutting quality or the torch burn.
All of the above factors directly bsp fittings affect the compression effect of the plasma arc, that is, the temperature affect the plasma arc and the energy density, and high-temperature plasma arc, high energy resolution set the cutting speed, so the above factors were associated with the cutting speed. Ensure the cutting quality of the premise, should be possible to improve the cutting speed. This is not only mention high productivity, and can reduce the amount of deformation of parts cut kerf area and heat affected zones. If the cutting speed is inappropriate, the opposite effect, but will also increase split flanges the sticky residue, cutting quality.

A miniature gantry hydraulic testing machine

Desktop engraving machine cutting machine consists evolved shape resembling the work bench fitted with a miniature gantry hydraulic testing machine, sheet cutting in areas such equipment has a great advantage,
Is widely used in advertising and automotive sheet metal industries.
Gantry CNC cutting machine that is the traditional double bottom frame beams and medium-sized machine tool holder vertical structure, span and vertical walking distance, suitable for large sheet metal processing.
Cantilever CNC Cutting Machine is a classic mechanical structure, a single base at one end connected with the beam, the beam torch lateral movement, such devices suitable for small sheet metal processing.
Robot cutting machine is developed abroad in recent years, a new type of cutting machine, its installation in a robotic arm torch, there are operations to achieve multi-axis CNC system can process three-dimensional
Shaped workpiece, to achieve 3D cutting, such equipment technical complexity, high cost, domestic equipment mainly from imports.
CNC intersection Cutting belongs to special cutting machine, its special structure dedicated to cutting pipes and cylindrical shapes, the current domestic production factory itself is not much, nor demand
Large.
Portable cutting machine is a semi-automatic skiving machine car evolved, in the car on the installation of cutting machine CNC system and transmission, the basic shape and Trolley

Cutting hose fittings quality directly affects the stability

Plasma arc cutting hose fittings quality directly affects the stability of the plasma arc instability will lead to cuts uneven buildup and other defects, can lead to
The control system related to reduced life components, nozzles, frequent replacement of the electrode. For this phenomenon, analyze and propose solutions.
1 pressure is too low
Plasma cutting machine work, such as working pressure is far below the required specification pressure, which means that the ejection velocity plasma arc weakened, input air flow
Is less than the predetermined value, this time can not form a high energy, high speed plasma arc, resulting in poor cut quality, not cut through, cut buildup phenomenon. Insufficient air pressure of the original
Due to: lack of input air compressor, air regulator valve regulator cutting hydraulic machines is too low, the solenoid valve within the oil, gas path is not smooth and so on.
The workaround is to use the former to observe compressor output pressure display, if not met, adjust the pressure or compressor overhaul. If the input air pressure has reached the required, You should check the air filter regulator adjusted correctly, gauge display can meet the cutting requirements. Otherwise deal with air filter regulator routine maintenance, indeed Paul input air dry, no oil. If you enter the air quality is poor, it will cause the solenoid valve to generate oil, valve open difficulties valve port can not be fully opened. Furthermore,Torch nozzle pressure is too low, the need to replace the solenoid valve; pneumatic smaller cross-section can also cause pressure is too low, according to the specification requirements replace the trachea.
2 pressure is too high

British interlock hose fittings producers

hose fittings

British interlock hose fittings producers are the United Kingdom, specifically for pressurized hydraulic hoses and convergence. hydraulic adaptors have a lot of material, the material of the advantages and disadvantages of each are different. flat seal metric hydraulic fittings are made of metal but also of special materials, comparatively speaking, bsp multiseal fitting is a new material, the advantage is obvious

Threaded metal hose connector termination

DPJ externally threaded metal hose connector termination is JB / GQ0552-83 D95-5 metal connector extension products. Metal joints made of zinc alloy die-casting, zinc plated, brushed or chrome; compact, non-porous, high strength. And metal hose connection is reliable, beautiful appearance. This termination type metal connector is used to connect to the line metal hose connector on the box. Adapter metal hose: JS type, JSH type, JSB type, JSHG type. Recommended use imperial or metric threaded metric hydraulic hose fittings metal fittings.

A complete hydraulic system consists of five parts

A complete hydraulic machines consists of five parts, namely, power components, actuators, control components, auxiliary components and hydraulic oil. The role of dynamic components of the original motivation of the mechanical energy into fluid pressure energy, refers to the hydraulic hose of pumps, which provides power to the entire hydraulic system. Design of the hydraulic pump gears are generally pumps, vane pumps and piston pumps. Action actuators (such as hydraulic cylinders and hydraulic motors) is the pressure of the liquid can be converted to mechanical energy to drive the load for a linear reciprocating motion or rotary motion.