Cutting nozzle tip height is the end to reusable fitting

Cutting nozzle tip height is the end to reusable fitting be cut from the workpiece surface. The distance is generally 4 ~ 10mm. It is the same with the electrode within the shrinkage, the distance to the right in order to give full
waving plasma arc cutting efficiency, otherwise it would cutting efficiency and cutting quality or the torch burn.
All of the above factors directly bsp fittings affect the compression effect of the plasma arc, that is, the temperature affect the plasma arc and the energy density, and high-temperature plasma arc, high energy resolution set the cutting speed, so the above factors were associated with the cutting speed. Ensure the cutting quality of the premise, should be possible to improve the cutting speed. This is not only mention high productivity, and can reduce the amount of deformation of parts cut kerf area and heat affected zones. If the cutting speed is inappropriate, the opposite effect, but will also increase split flanges the sticky residue, cutting quality.