Plastics piping systems for hot and cold water test machine for hot and cold water with a variety of plastic pipes and fittings (PP, PEX, PVC-C, PB), according to the requirements of assembly and withstand a certain pressure at a temperature after the number of alternating Check pipes and fittings for leaks, the instrument is mainly used for hydraulic hose and fittings pipe fittings after assembly system tests. Hot and cold water systems for thermoplastic pipe fittings system test requirements. Test device using foreign advanced pressure control device for controlling, preventing the pressure fluctuations with temperature and time, the test pressure circulation pump imported from abroad provided to ensure that the pressure of the long-term effectiveness. Temperature conditions under which detection device automatically opens the appropriate return valve, reduce energy consumption, reduce the cost of test. Instrument with a special device greatly eliminates piping noise, are imported refrigeration equipment, power consumption, cooling capacity; reliable security guards and comprehensive level measurement devices to ensure that the high and low liquid level in the tank, When the test fails, the pipeline has ruptured, the time of shutdown; personnel can effectively protect against experimental tests and easy to observe the process of product design fully simulate the real product practical application scenarios, design ideas unique in the country.
) Pressure control range: 0.4MPa ~ 1.0MPa can be arbitrarily set
2) Pressure control precision: the set value ± 0.05MPa (alternating hot and cold water when no water hammer phenomenon)
3) Hot and cold water alternating time: less than 1 minute
4) Hot and cold water, each cycle: 15 minutes
5) cycles: 1 ~ 10000 arbitrarily set between.
6) Temperature indication error: 0.5 ℃
7) thermostatic bath temperature uniformity: ≤ ± 1 ℃
8) Temperature control range: Cold water: 15 ℃ ~ Hot water temperature: room temperature ~ 95 ℃
9) the applicable maximum diameter: Ф63
10) Test Station number: 6 channels (12 channels to be special orders)
11) Power supply: 380VAC/220VAC mix
12) Standard Rated Power: 25kW
13) Instrument Size: 5550mm × 2800mm × 1800mm
14) Instrument Installation size: 8000mm × 7000mm × 1800mm
Hello,
回复删除I admire the valuable information you offer in your articles. If you're a manufacturer of hose products or equipment that makes use of hoses, you'll very likely be called upon, sooner or later, to think about your metal ferrules and Hose Couplings in China. Thanks for the sharing such a good content..