High pressure hose fittings installation considerations

(1) hose in motion or stationary, can not excessive bending, it can not be bent in the roots, at least to start bending at 1.5 times its diameter;
(2) The 60 Cone seal hose fitting is moved to the extreme position not pull it too tight, it should be more relaxed;
(3) try to avoid the Multiseal metric hose fitting twisting deformation;
(4) hose as far as possible away from the heat radiating member, fashion necessary insulation boards;
(5) Avoid hose external damage, such as the use of the same term friction surface of the member;
(6) If the hose caused by excessive weight deformation, should support members.