Hydraulic fittings

In addition to the power source, the control section, the executing agency outside of the application of the hydraulic system components, the other is called hydraulic fittings; a complete hydraulic tool system consists of five parts, namely, power components, actuators, control components, auxiliary components and hydraulic oil. The role of the power element is the prime mover of the mechanical energy is converted into a liquid pressure energy, the hydraulic system of the pump means,tube clamp  which provide power to the implementation of the entire hydraulic system components (such as hydraulic cylinders and hydraulic motors) the role of the fluid pressure energy conversion the mechanical energy to drive the load for a reciprocating linear motion or rotary motion; control element (i.e. various hydraulic valves) in the hydraulic system to control and regulate fluid pressure, flow and direction.

Flared fittings andInsert Welded pipe joints

Flared fittings andInsert Welded pipe joints
Using flaring tube ends are sealed, no additional seals. Simple structure, suitable for thin-walled pipe coupling for oil and gas as a medium low pressure pipeline system, which allows the use of pressure are shown in Table 41 Table 27 ~ 41GB5625.1 ~ 5653-1985
Insert Welded pipe joints
Will require the length of tube clamp the tube into fitting until the pipe end in contact with the inner end of tube fittings, tube and pipe joints will be welded into one, eliminating the need to take over, but require strict application of pipe size to oil, gas pipeline system for the medium