cloth hose diameter round loss treatment

Fabric hose diameter round loss there are many approaches which can be used two uncapped autoclave, the tank in addition to a normal inlet pipes and exhaust pipes, but in the creation of two cans of soft convergence inlet pipe and the exhaust pipe, forming a good hose is placed on the platen vulcanizing car, there are loose platen two multi-plug through the steam pipe, hose two distinguished pierce each respective manifold block plug inside, fixed with clamps Well, then vulcanized vehicle selected into the tank, to identify the convergence of multi-plug Explorer and soft steam pipe attached securely closed autoclave, start with one end of the flexible hose to the steam pipe convergence enter the steam, and then give it away again autoclave steam, pressure inside the hose high pressure over 0.02 a tank O. 03MPa under vulcanization. Tank and hose need to live within the condensate discharge. hydraulic couplings Vulcanization end, stick pressure also exhaust and spray cold water in the tank to cool cans of soft convergence tube after each unload, pull vulcanized car unloading Lost fixture, pulled out the hose cutting head reversal. This approach works best!